We finished this bad boy, we did two rounds on the panel because we were experimenting with how to get the optical illusions to look the best while also being able to see the components inside. I really love this one and think we will do more of these because we've brainstormed a few more ideas regarding how far we can go with the optical illusion blending with the inner components. This also made me think of a new stream our team might get into, which is kinetic computers, ones that move in interesting ways. Unboxing : Timelapse: Full Build: Showcase: Please let us know what you think in the comments below!

Step 1: Alright so first of all, we start by grabbing out the Motherboard, CPU, RAM, M.2 and the backplate for the CPU Cooler. Step 2: Now that we have all of that out and ready, we install the CPU first. So I had to open the CPU socket, then install said CPU making sure the triangles in the corner line up. Step 3: Now it was time for me to remove the M.2 heatsink cover from the motherboard, and install the M.2. Which with this case was completely toolless. After the M.2 was installed, I undid the 4 clips on the RAM sockets, and installed all 4 sticks of RAM into the Motherboard. Step 4: Easy step now, all I had to do was remove the sticky cover from the CPU Backplate, line it up with the screws and push down against the piece. Only slightly so that it contacts with the back of the motherboard and sticks there. Step 5: Alrighty, now it was time for me to prep and install the Power Supply. Firstly was to plug in, the 24 pin, 2 8-pin CPU power, 2 8-pin PCIE power cables, and the 1 sata power cable. Alright, next step was to turn the case around, and install the Power Supply into the back of the case. Step 6: I was now at the time to install the Motherboard into the case, so I grabbed the 9 necessary screws and did just that, lining the IO shield to the back of the case Step 7: Okaly Dokaly, the next step was to install the AIO CPU cooler. Now I'm going to start by grabbing it out, making sure the fans are in the layout I was wanting (they were). Now that I was ready, I grabbed the Radiator and fans, and installed them into the top of my case, securing it with the 12 included screws. Step 8: It was now time to apply some Thermal Paste to the CPU, and then install CPU cooler. So that's what I did, I applied some Thermal paste in my traditional "X with dot" pattern. Step 9: Now one of the most tedious parts of building a PC has arrived, cable managing. So I quickly installed my fan hub into the bottom of the back of the case, by removing one of the unused SSD bays. I then started running cables, and managing exactly where I wanted each cable to go. This was an absolutely long job, probably almost 2 hours, getting ALL the cables exactly where they would look best. Step 10: Now the time has finally arrived, to install the funnest and usually most expensive part into a PC, the Graphics Card. Now this is an easy part, but it really just ties together an entire computer. So with the Graphics Card installation, and the 2 8-pin PCIE cables plugged in, I had a completed computer. Step 11: This step was just about turning it on, and making sure it power cycles and boots, which no issues of course.

Unfortunately we will have to skip the Carnival for the first time due to technical issues :x We have been working on improving LilithMommy, we want to make her sing (it's already pretty good). Her model is also undergoing improvement, here is the current progress update. She will also have a few new dance moves soon. We are also working on our third game for the Carnival and it's getting close, this one will be a lot more interactive as it will come with a Twitch extension and a way to also interact with it through the website for those people watching from other platforms who cannot use twitch. We are at $5650 claimed which you have to admin, is pretty insane. Simply come and win every hour in our mini games, like a digital experience of a carnival! See you next weekend!

🎙️ From Black Lotus to PvP Glory – The Coooley Interview | Pro Gamers Journal In this special edition of Pro Gamers Journal, we dive into the world of Coooley — a legendary figure in the Diablo II: Resurrected community, Magic: The Gathering champion, world-record holder, and creator of the Diablo Fighting Championship. But this isn’t just a podcast — it’s a masterclass in gaming, content creation, and staying true to your path. 🎮 What’s Inside This Episode: Coooley’s Full Origin Story From the earliest days of Diablo II to building one of the strongest PvP communities in modern ARPGs. Owning a Real Black Lotus Magic: The Gathering fans — yes, it’s true. And we talk about the significance of that card, his tournament wins, and what it taught him about value. His Rivalry with MrLlamaSC The moment that made his catchphrase iconic: “I beat MrLlamaSC once.” Inspiration from Raxxanterax Behind-the-scenes moments on how top creators influence each other to level up. Creating the Diablo Fighting Championship Why he launched his own PvP league and what it takes to organize competitive content that people care about. Breaking the D2R Uber Tristram World Record The strategy, the hype, the community reaction — all in his words. Love, Mentors, and Life Before Streaming Real talk about personal growth, navigating pressure, and what it means to build something that matters. 🎯 Why You Should Watch Whether you're a gamer, Twitch streamer, YouTube creator, ARPG fan, or just someone who loves seeing people go all-in on their passion — this is for you. We talk about the grind behind the scenes, the mindset required to last, and the tools creators use to stay authentic, build community, and grow their impact. If you're just getting started or looking for a spark to keep going, Coooley drops insights you won’t find anywhere else — all with honesty, humor, and a bit of chaos. 🎧 This is only Part 1 of our 6-hour deep dive. Make sure to subscribe so you don’t miss the rest.

We thought, well, we knew it would be a good idea to give people updates about what is going on in the club since people might be wondering about the progress of the current build, their own reward deliveries, what the next builds might be and overall how the club is going. This is the beginning of that. Let's start with the current build, The Last Epoch PC. This is an extremely difficult build with a very intricate water cooling system and a details case mod which we had to 3D model, print, assemble, sand, prime, paint 3 coats on and mount. WORK IN PROGRESS PHOTOS - nothing is final here EHG told us that they would help us show the PC off, unfortunately we think that if we were to send it to someone next weekend, it would be in the spotlight for too short of a time for the amount of effort time and money put into it. Therefore we have decided to move this build to next month, I hope the concepts we showed before being realised here in these new images is enough for you to not get too upset with us for this decision. WORK IN PROGRESS PHOTOS - nothing is final here (we have more polishing etc to do) We do have a saving grace, a friend of ours who goes by the name Waffles has been building computers full time as a life style and profession, we have decided that he will join us in building custom PC's, he is undertaking the Kintsugi build which is an amazing computer but we got stuck with that one too because the waterblocks for 5080s are not available, ours was supposed to arrive before the 10th of April and then we got an email saying it will come at the end of May. So Waffles did some quick thinking and told us everyone loves his sleeper builds, so we went ahead and started to concept out a sleeper build. We got all of the parts and he went to work, he provided the necessary videos (it isn't easy especially for the first time to get good footage, he made a build log which you can read, we edited all of the videos and posted them). This computer is done and this is the one we want to send out next weekend. Now for some people we are still working through getting their reward to their door, we always do achieve it, we delivered a computer to China (not easy, had to go there personally on a plane) and we delivered a computer to South Africa (insane if you think about it), a computer with a real diamond in it too. That one came with a broken ram card (We tested everything before shipping it so the plane turbulence may have caused damage), we have literally replaced every single damaged component if there is one in a PC going as far as replacing an entire GPU for the first clock we sent (damaged in flight). Based on these experiences, we have learned to take great care when shipping to certain countries, we get custom crates made, go very heavy on packing, get premium delivery services (we had computers stuck in random warehouses etc otherwise), this is time consuming and costs a lot of money so please bare with us if you have a large reward which we need to ship to you, some of the custom computers we build are THIRTY KILOGRAMS and have intricate designs so we want to make sure it gets to people in one piece. We will get better and faster at shipping worldwide as we go but so far we have delivered every computer thus far and replaced any damaged parts (only happens about 10% of the time). Now let's get on to what we have planned next, We have been working on a project revolving around the first ever Macintosh, we are trying to fit it out with the best modern parts it can fit, we've already cleaned up the case to remove stains and yellowing. The biggest challenge we have put forward to ourselves is to make the Screen of the Macintosh hook up the the modern GPU, that means we will be seeing modern games in low pixel count black and white on the screen. This is going to be insane if it works the way we think it will, it's going to be a real gem and of course you can hook up additional monitors to play games properly, it's just for show but we want the screen to work properly. You can check out how this is done here We'll of course have the full build video etc soon, we already filmed taking the Mac apart which was very interesting to us as we were dealing with some of the first harddrives in personal computing, these things had 20 megabytes of disk space xD. We will try to give weekly updates now here 🙂