Cat_Dad8311 Posted February 21 Share Posted February 21 So this morning when I turned on the pc there no picture I knkw it did an update and shit down before I went to bed I tried different display cables another monitor tried the display port for the motherboard and not the graphics card I removed the cmos battery for 5 minutes and tried that but nothing it turns on lights up fans spin has not gotten hot but right now nothing and almost had it set up to start playing on it lol Link to comment Share on other sites More sharing options...
Macsusc Posted February 22 Share Posted February 22 Hmm, shouldn't mess with cmos battery usually, wait for waffles to sort this out, if we need to replace anything we will. Link to comment Share on other sites More sharing options...
Macsusc Posted February 22 Share Posted February 22 Can you drop an image of how you have the monitor plugged into the back? Link to comment Share on other sites More sharing options...
AlmightyWaffles Posted February 22 Share Posted February 22 Hey guys, this is a very interesting situation, as it was posting for you and now doesn't, I would check IF the GPU had come loose a little bit in transit, and just finally fell that mm more where it wont connect now? Can you please send/upload an image of the internet of the PC, focusing mainly on the GPU, also I believe that Motherboard should have debug lights, if you could get an image of them for me too please. That would be great. Link to comment Share on other sites More sharing options...
Macsusc Posted February 22 Share Posted February 22 Yep let's see the debug lights, also besat way to make sure the GPU is not loose is to simply reseat it, take it out entirely and plug it back in. In terms of cables, just make sure you are plugging them into the GPU, not the motherboard outputs on the back 🙂 Link to comment Share on other sites More sharing options...
Cat_Dad8311 Posted yesterday at 12:15 PM Author Share Posted yesterday at 12:15 PM Okay i will turn it on in a bit and take the pics and post still asleep they put me on stronger meds see the doctor/surgeon on March 9th but let me get to where im up a bit and ill get those to you Link to comment Share on other sites More sharing options...
Cat_Dad8311 Posted yesterday at 12:28 PM Author Share Posted yesterday at 12:28 PM Link to comment Share on other sites More sharing options...
Cat_Dad8311 Posted yesterday at 12:29 PM Author Share Posted yesterday at 12:29 PM Link to comment Share on other sites More sharing options...
Cat_Dad8311 Posted yesterday at 12:29 PM Author Share Posted yesterday at 12:29 PM Here's the pics and yes I have it connected to the graphics card had to pop those plastic covers off and I think that red light is what yoir looking for Link to comment Share on other sites More sharing options...
Cat_Dad8311 Posted yesterday at 12:37 PM Author Share Posted yesterday at 12:37 PM Here's a better picture of the res light sorry about the forst one Link to comment Share on other sites More sharing options...
Macsusc Posted yesterday at 12:54 PM Share Posted yesterday at 12:54 PM Have you tried reseating the RAM? How about trying to boot with just one RAM stick and then just one of the other ones? They also need to be in the right slots based on the motherboards manual, sometimes that means A2 + B2 not A1 + A2. I'll let Waffles advise further though 🙂 thanks guys. Link to comment Share on other sites More sharing options...
Cat_Dad8311 Posted yesterday at 02:23 PM Author Share Posted yesterday at 02:23 PM Yeah I figured i wouldn't touch or do anything else till waffle says so as he replies ill try things and it will get there Link to comment Share on other sites More sharing options...
Cat_Dad8311 Posted yesterday at 03:03 PM Author Share Posted yesterday at 03:03 PM And as far as the ram i think its behind the cooling fans and things and with my current health and condition im not gonna try and remove anything to get to it I have to many spams in my hands to trust myself Link to comment Share on other sites More sharing options...
Macsusc Posted 15 hours ago Share Posted 15 hours ago Pop this fan off, you just need to pull the metal clamps on each side of it, should come off easily, you should see some ram under there Link to comment Share on other sites More sharing options...
AlmightyWaffles Posted 13 hours ago Share Posted 13 hours ago The DRAM indicator light signifies an issue with the RAM modules. As an initial troubleshooting step, I recommend reseating the RAM. Begin by removing the fan assembly shown in the image above. Next, locate the RAM sockets and press down on the retaining clips at the top of each socket to release the modules. Carefully remove the RAM sticks, noting their original positions. When reinstalling, ensure the pins on the modules align correctly with the socket notches. Apply firm, even pressure to seat the RAM until the retaining clips snap securely into place around the modules. Link to comment Share on other sites More sharing options...
Cat_Dad8311 Posted 2 hours ago Author Share Posted 2 hours ago Okay i did that also tried removing one at a time the light is still there Link to comment Share on other sites More sharing options...
Cat_Dad8311 Posted 1 hour ago Author Share Posted 1 hour ago And thx for that one pic helped getting the fan off Link to comment Share on other sites More sharing options...
Recommended Posts