Cat_Dad8311 Posted Saturday at 07:11 PM Share Posted Saturday at 07:11 PM So this morning when I turned on the pc there no picture I knkw it did an update and shit down before I went to bed I tried different display cables another monitor tried the display port for the motherboard and not the graphics card I removed the cmos battery for 5 minutes and tried that but nothing it turns on lights up fans spin has not gotten hot but right now nothing and almost had it set up to start playing on it lol Link to comment Share on other sites More sharing options...
Macsusc Posted Sunday at 03:09 AM Share Posted Sunday at 03:09 AM Hmm, shouldn't mess with cmos battery usually, wait for waffles to sort this out, if we need to replace anything we will. Link to comment Share on other sites More sharing options...
Macsusc Posted Sunday at 03:10 AM Share Posted Sunday at 03:10 AM Can you drop an image of how you have the monitor plugged into the back? Link to comment Share on other sites More sharing options...
AlmightyWaffles Posted Sunday at 03:17 AM Share Posted Sunday at 03:17 AM Hey guys, this is a very interesting situation, as it was posting for you and now doesn't, I would check IF the GPU had come loose a little bit in transit, and just finally fell that mm more where it wont connect now? Can you please send/upload an image of the internet of the PC, focusing mainly on the GPU, also I believe that Motherboard should have debug lights, if you could get an image of them for me too please. That would be great. Link to comment Share on other sites More sharing options...
Macsusc Posted Sunday at 03:31 AM Share Posted Sunday at 03:31 AM Yep let's see the debug lights, also besat way to make sure the GPU is not loose is to simply reseat it, take it out entirely and plug it back in. In terms of cables, just make sure you are plugging them into the GPU, not the motherboard outputs on the back 🙂 Link to comment Share on other sites More sharing options...
Cat_Dad8311 Posted 1 hour ago Author Share Posted 1 hour ago Okay i will turn it on in a bit and take the pics and post still asleep they put me on stronger meds see the doctor/surgeon on March 9th but let me get to where im up a bit and ill get those to you Link to comment Share on other sites More sharing options...
Cat_Dad8311 Posted 1 hour ago Author Share Posted 1 hour ago Link to comment Share on other sites More sharing options...
Cat_Dad8311 Posted 1 hour ago Author Share Posted 1 hour ago Link to comment Share on other sites More sharing options...
Cat_Dad8311 Posted 1 hour ago Author Share Posted 1 hour ago Here's the pics and yes I have it connected to the graphics card had to pop those plastic covers off and I think that red light is what yoir looking for Link to comment Share on other sites More sharing options...
Cat_Dad8311 Posted 1 hour ago Author Share Posted 1 hour ago Here's a better picture of the res light sorry about the forst one Link to comment Share on other sites More sharing options...
Macsusc Posted 51 minutes ago Share Posted 51 minutes ago Have you tried reseating the RAM? How about trying to boot with just one RAM stick and then just one of the other ones? They also need to be in the right slots based on the motherboards manual, sometimes that means A2 + B2 not A1 + A2. I'll let Waffles advise further though 🙂 thanks guys. Link to comment Share on other sites More sharing options...
Recommended Posts